Centrifugal Water Pump
Standard, trash, and submersible models are three different alternatives to centrifugal water pumps.
All liquids can be pumped using centrifugal water pumps, even liquid with low viscosity. These pumps work great with thin liquids and high flow rates.
What Are the Advantages of Using Centrifugal Water Pumps? Centrifugal pumps could present these 6 problems:
- Corrosion: Different fluid properties can corrode the pump.
- Overheating: Some pump might need liquid recirculating to avoid overheating caused by low flows
- Prime: Centrifugal pumps must be filled with the fluid in order to operate properly
- Capitation: The positive suction head of the system is too low for the selected pump
- Wear of the Impeller: Can be worsened by suspended solids
- Leakage: A long rotating shaft
When Can They Be Used? Centrifugal pumps are used on these 6 applications, just to name a few:
- Buildings: To pump water supply, including pneumatic systems and in places where no suction lift is required.
- Boost Application: To boost pressure from the intake line.
- Wells: In domestic water supply systems
- Fire Protection System: To provide a continuous pressure source, but these water pumps should be in compliance with NFPA.
- Hot-Water Circulation: To move water in a closed system which requires low head.
- Sump Pits: Either vertical or horizontal water pumps. Units are operated by an automatic switch controlled by the float.
Centrifugal Water Pump Product List
Centrifugal pump atau pompa centrifugal adalah jenis pompa yang paling banyak digunakan pada industri ataupun pertanian, memiliki kelebihan diataranya karena pengoperasiannya yang mudah, maintenance yang tidak terlalu mahal, tidak berisik dan lain sebagainya.
Garansi 1 Tahun untuk pompa, tidak termasuk Electric Motor.
Pompa Centrifugal, Kapasitas Sedang s/d Besar
Model | Listrik (KW) |
Diameter Pipa Dorong |
Kapasitas (liter/menit) |
Daya Dorong (meter) |
---|---|---|---|---|
TCP 130 | 0.37 | 1″ x 1″ | 75 – 30 | 10 – 18 |
TGA 1A | 0.75 | 1.5″ x 1.5″ | 250 – 100 | 9 – 17 |
TGA 1C | 0.75 | 2″ x 2″ | 300 – 100 | 6 – 13 |
THF 5A | 1.5 | 3″ x 3″ | 800 – 400 | 7 – 12 |
THF 6A | 2.2 | 2″ x 2″ | 1000 – 500 | 6 – 11 |
THF 6B | 1.1 | 2″ x 2″ | 300 – 100 | 15 – 20 |
THF 6B – 3 | 2.2 | 2″ x 2″ | 300 – 100 | 20 – 26 |
THF 150 | 4 | 2″ x 2″ | 400 – 200 | 16 – 36 |
THF 200 | 5.5 | 2″ x 2″ | 450 – 200 | 20 – 45 |
THF 250 | 7.5 | 2″ x 2″ | 840 – 200 | 22 – 48 |
TNF 130 | 2.2 | 3″ x 3″ | 1000 – 500 | 6 – 11 |
TNF 150 | 4 | 4″ x 4″ | 1700 – 600 | 10 – 18 |
Pompa Centrifugal Horizontal Multistage, 1 x 220V
Model | Listrik (KW) |
Kapasitas (m3/jam) |
Daya Dorong (meter) |
---|---|---|---|
CUC 2 – 40 | 0.55 | 2 | 28 |
CUC 2 – 60 | 0.75 | 2 | 42 |
CUC 4 – 40 | 0.75 | 4 | 30 |
CUC 4 – 60 | 1.1 | 4 | 45 |
CUC 8 – 30 | 1.8 | 8 | 30 |
CUC 8 – 40 | 2.2 | 8 | 45 |
CUC 12 – 25T | 2.2 | 12 | 33 |
Pompa Centrifugal Vertical Multistage
Model | Listrik (KW) |
Kapasitas (m3/jam) |
Daya Dorong (meter) |
---|---|---|---|
CVL 2 – 7 | 0.75 | 2 | 52 |
CVL 2 – 11 | 1.1 | 2 | 74 |
CVL 2 – 13 | 1.5 | 2 | 90 |
CVL 2 – 15 | 1.5 | 2 | 105 |
CVL 2 – 18 | 2.2 | 2 | 125 |
CVL 2 – 22 | 2.2 | 2 | 152 |
CVL 3 – 15 | 1.1 | 3 | 64 |
CVL 3 – 19 | 1.5 | 3 | 82 |
CVL 3 – 21 | 2.2 | 3 | 90 |
CVL 3 – 23 | 2.2 | 3 | 99 |
CVL 3 – 25 | 2.2 | 3 | 107 |
CVL 3 – 27 | 2.2 | 3 | 116 |
CVL 3 – 29 | 2.2 | 3 | 125 |
CVL 3 – 36 | 3 | 3 | 155 |
CVL 5 – 08 | 1.1 | 5 | 40 |
CVL 5 – 10 | 1.5 | 5 | 50 |
CVL 5 – 16 | 2.2 | 5 | 80 |
CVL 5 – 20 | 3 | 5 | 100 |
CVL 5 – 29 | 4 | 5 | 145 |